MADRIX® Nebula 12 Universe SPI Pixel Lighting Controller

SPI Converter & Direct Connection - Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.
Quality Output Of 12 Universes - Each device drives up to 2.040 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.
Art-Net / Streaming ACN / USB - Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition. simply connect to MADRIX 5 over USB.
Sync Mode & Daisy-Chain Support - MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.
Designed For DIN Rails Or Walls - Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick. easy. and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.
Invaluable Features - The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware can be updated for future enhancements. Access and change specific device settings using the built-in web configuration page.

Features

1. SPI Converter & Direct Connection - Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.
2. Quality Output Of 12 Universes - Each device drives up to 2.040 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.
3. Art-Net / Streaming ACN / USB - Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition. simply connect to MADRIX 5 over USB.
4. Sync Mode & Daisy-Chain Support - MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.
5. Designed For DIN Rails Or Walls - Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick. easy. and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.
6. Invaluable Features - The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware can be updated for future enhancements. Access and change specific device settings using the built-in web configuration page.

Supply Of PowerV–24V DC; over / A) 2-pin. pluggable screw terminal (12 A max.) /B) 5V USB / C) Port 1 or 2 sourced from LEDs; 6A max. load per port when supplying through to LEDsPower Consumption < 1.5W (300mA) during normal operation (500mA max. fused)Network ProtocolsArt-Net (I. II. 3. 4. incl. ArtSync). Streaming ACN (sACN / ANSI E1.31)Data OutputFirmware ≤ 5.XX: 8x 512 channels SPI TTL (Max. output per port: 680 RGB LEDs / 512 RGBW LEDs / 2.048 1-channel LEDs) Firmware ≥ 6.00: 12x 512 channels SPI TTL (Max. output per port: 1.020 RGB LEDs / 768 RGBW LEDs / 3.072 1-channel LEDs)Ports2x ports (Via 2x 4-pin. pluggable screw terminals)Ethernet2x RJ45. Auto MDI-X. daisy-chain support. 10/100 MBit/s (Compatible with 1 GBit/s)Ethernet Switch Lookup Table (ALU) for 1024 unicast MAC addressesUSB1x port. USB 2.0. type-B female socketHandling5 status LEDs (+ 4 network status LEDs)CaseNon-conductive. V-0 flammability rating (UL94 test method). designed for 35 mm DIN-rails or wall mountingDimensions90mm x 70mm x 46mm (Length x Width x Height)Weight 110g | 132g incl. screw terminals and wall mountsTemperature Range -10°C to 70°C (Operating) | -20°C to 85°C (Storage)Relative Humidity5% to 80%. non-condensing (Operating / Storage)IP RatingIP20Certificates CE. EAC. FCC. RoHS

MADRIX Nebula 12 Universe SPI Pixel Lighting Controller

Technical Specifications

Wire Diagram and Dimensions